Bathroom Remodeling Secrets – Reglaze Don’t Replace

Looking to save a little time and cash on your bathroom remodeling project? Are you starting with that bathtub that has lost its “glimmer”? Many will pull out the bathtub that has lost its pizzazz and replace it with a new, shiny model. You want to know a secret, though? You do not have to replace your bathtub, you can simply reglaze it! In this article, you will learn the steps that are involved in the reglazing process. Now, you can simply reglaze, not replace! You can save yourself hundreds of dollars instead of spending hundreds!

1) The first step to reglazing that bathtub is to simply ensure that the area in and around the bathtub is in good shape. This means checking out the all the plumbing fixtures, faucets and all the caulking and sealant around the tub. It is essential that you ensure that all previous damage is dealt with prior to reglazing the bathtub. This way, there is no damage done to the new bathtub finish if repairs must be made.

2) When electing to reglaze the bathtub instead of replacing it, it is important that you have ventilation in the room. You can choose to go simple and simply put a fan in a bathroom window, or you can rent a ventilation system from a home improvement store. If you do not have the right amount of airflow in the room when reglazing the bathtub, it is likely that you will get very sick while performing the job.

3) Before reglazing, it will be necessary to remove the trim and all of the caulking from in and around the bathtub. You will also need to thoroughly clean the bathroom component with a strong tub cleanser and sand it down appropriately. You may need to wash and sand the bathtub more than once.

4) Next, it is time for the epoxy material. This will put the bathtub in the process of prime. You will need a squeegee and a dry cloth when applying the glaze to the bathtub because this allows you the ability to evenly go over the entire area of the tub.

5) You should allow the glaze to remain on the bathtub for up to forty eight hours. This allows the glaze time to dry and to soak into the surface of the tub. Many individuals who are engaging in bathroom remodeling projects will ensure that the product remains on the bathtub for long amounts of time because it seems that the longer it is not exposed to moisture, it settles more appropriately.

6) Once you have allowed the bathtub to sit for a couple of days or longer, it is time to replace and reattach all the pieces that were removed and disconnected prior to the job. This includes the trim that you removed, the caulking that was stripped away and all the plumbing fixtures that were not attached. You should be careful not to damage the glaze while doing this. If you find that the glaze does become damaged, or has not settled appropriately, you may consider redoing the job that you started.

7) Once everything is in place, it is important to ensure that the tub is left standing once more to dry. The sealers that were used to reattach the fixtures, the adhesives used to reattach certain components, and the caulking that was used to seal the bathtub must be given time to settle and dry before the bathtub is put to use again.

If you are remodeling your bathroom, there is no use in spending large amounts of money on a bathtub if you just want to achieve the vibrance and shine that accompanies a brand new bathtub. Reglazing your old bathtub can bring out a new, fresh appearance. As a matter of fact, you may not even recognize the bathtub once you are finished with it! For more information on bathroom remodeling tips, be certain to bookmark this website and visit frequently!